Calibrators

	2C02   Fluke 725 Multifunction Process Calibrator

Fluke 725 Multifunction Process Calibrator This Unit Is In Like New Condition With Protective Film Still On The Screen! Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules Perform fast linearity tests with auto- step and auto-ramp features Regular Price: $ 1,795.00 / Each Sale Price: $ 1,595.00 / Each You Save: $ 200.00 / Each

Take along the new Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests. From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.

The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.

• Small, streamlined shape makes it easy to carry
• Rugged, reliable design stands up to field use
• Easy to read measure/source screen lets you view input and output simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
• Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
• Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
• Support flow meter testing with frequency and CPM functions
• Perform fast linearity tests with auto- step and auto-ramp features
• Power transmitters during test using loop supply with simultaneous mA measurement
• Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms
• Store frequently used test setups for later use
• Backlight lets you work in poor light
• Large battery capacity of four AA cells
• Battery door for easy changes

Specifications:

Measurement Accuracy
Voltage DC	30.000 V  0.02%+ 2 counts (upper display) 30.000 V  0.02%+ 2 counts (lower display) 100.00 mV  0.02%+ 2 counts -10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC	24.000 mA  0.02%+ 2 counts
Resistance	0.0 to 400.0 O  0.1O (4-wire), 0.15O (2- and 3-wire) 401 to 1500 O  0.5O (4-wire), 1O (2- and 3-wire) 1500 to 3200 O  1O (4-wire), 1.5O (2- and 3-wire)
Frequency	2.0 to 1000.0 CPM  0.05 % + 1 count 1.0 to 1100.0 Hz  0.05 % + 1 count 1.00 to 10.00 kHz  0.05 % + 1 count Sensitivity  1 V peak-to-peak-minimum
Pressure	Accuracy  from 0.025% of range using any of 29 pressure modules.  (for detailed specifications refer to pressure modules in options and accessories)  Modules available for differential, gage, vacuum, absolute, dual and high pressure.

Source Accuracy
Voltage DC	100.00 mV  0.02%+2 counts 10.000 V  0.02%+2 counts -10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC	24.000 mA (Source)  0.02%+ 2 counts 24.000 mA (Simulate)  0.02%+ 2 counts
Resistance	15.0 to 400.0 O  0.15 O (exc. current 0.15 to 0.5 mA), 0.1 O (exc. current 0.5 to 2 mA) 401 to 1500 O  0.5 O(excitation current 0.05 to 0.8 mA) 1500 to 3200 O  1 O(excitation current 0.05 to 0.4 mA)
Frequency	2.0 to 1000.0 CPM  0.05% 1.0 to 1100.0 Hz  0.05% 1.00 to 10.00 kHz  0.25% Waveform:  5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples
Measure Accuracy:	NI-120  0.2 °C PT-100 (385)  0.33 °C PT-100 (393)  0.3 °C PT-100 (JIS)  0.3 °C PT-200 (385)  0.2 °C PT-500 (385)  0.3 °C PT-1000 (385)  0.2 °C Resolution:  0.1 °C J:  0.7 °C K:  0.8 °C T:  0.8 °C E:  0.7 °C R:  1.8 °C S:  1.5 °C B:  1.4 °C L:  0.7 °C U:  0.75 °C N:  0.9 °C Resolution  J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F XK  0.6°C BP  1.2°C
Source Accuracy:	NI-120  0.2 °C PT-100 (385)  0.33 °C PT-100 (393)  0.3 °C PT-100 (JIS)  0.3 °C PT-200 (385)  0.2 °C PT-500 (385)  0.3 °C PT-1000 (385)  0.2 °C Resolution:  0.1 °C Note:  Accuracy stated for 4-wire measurement. J:  0.7 °C K:  0.8 °C T:  0.8 °C E:  0.7 °C R:  1.4 °C S:  1.5 °C B:  1.4 °C L:  0.7 °C U:  0.75 °C N:  0.9 °C Resolution  J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C XK  0.6°C BP  1.2°C

Specifications
Ramp Functions	Source functions:  Voltage, current, resistance, frequency, temperature Ramps  Slow ramp, Fast ramp, 25% step-ramp
Loop Power Function	Voltage:  24 V Accuracy:  10% Maximum current:  22 mA, short circuit protected
Step Functions	Source functions:  Voltage, current, resistance, frequency, temperature Steps  25% of range, 100% of range

Environmental Specifications
Operating Temperature	-10 °C to +55 °C
Storage Temperature	-20 °C to 71 °C
Operating Altitude	3000 m

Safety Specifications
Agency Approvals	EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

Mechanical & General Specifications
Size	130 x 236 x 61 mm
Weight	0.65 kg
Batteries	4 AA alkaline batteries
Battery Replacement	Separate battery compartment, accessable without breaking calibration seal
Side port connections	Pressure module connector, also used for remote real-time programming

Includes:

• Fluke 725 Multifunction Process Calibrator
• Fluke TL75 Hard Point Test Lead Set (1 Red - 1 Black)
• Fluke AC20 Alligator Clips
• Hard Copy User Manual
• Original Factory Box