|
| 2I13 Fujikura FSM-50S SM MM Fusion Splicer With Cleaver |
|
|
|
 |
 |
 |
| |
 |
 |
Fujikura FSM-50S SM MM Fusion Splicer With Cleaver & Built in Heat Shrink Oven
Price: $ 8,995.00 / Each
|
 |
|
|
|
 |
 |
 |
|
|
|
This is a new standard of core to core aligning arc fusion splicer.
A number of improvements have been added to the performance-proven Profile Alignment System (PAS) platform, resulting in the smallest and lightest package of its kind. With improved splice & tube-heat time, the splicing operation is the world's fastest truly optimized for field use. Other valuable features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. With these features, the FSM-50S is now more than a tool, it is a work of art.
Features
Fully automatic core alignment with 9 second splice time for SM fiber
Reduced splice protector shrink time – now only 35 seconds
Extremely compact and lightweight – just 2.8kg
Automatic fibre type identification
Multi-position monitor for front or top mounting
High capacity battery option for 120 splice/shrink cycles
Real time arc calibration
Fibre clamps integrated into wind protector to reduce operation time
Dual-directional operating system
The reversible monitor accommodates the user's ergonomic preference. With a control panel on each side, the ease of use is phenomenal.
Splice time of 9 sec.
Improved computer processing and newly introduced stepping motor help achieve 9 sec. splice time with SM fiber.
Tube-heat time of 35 sec.
Advanced heater design shortens tube-heat time to 35 sec. with FP-03 protection sleeve.
Large capacity battery option
Two types of slot-in batteries BTR-06S and BTR-06L are available.
Arc calibration-free system
Time-consuming arc calibration is no longer requried with real- time arc calibration.
| Applicable fibers |
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655) |
| Fiber Count |
Single |
| Cladding diameter |
80 to 150µm |
| Coating diameter |
100 to 1000µm |
| Fiber cleaved length |
8 to 16mm with coating diameter of 250µm or less. 16mm with coating diameter of 250 to 1000µm.
Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000µm is available. |
| Actual average splice loss |
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.
Measured by cut-back method relevant to ITU-T and IEC standards. |
| Splice time |
Typical 9sec. with standard SM fiber. |
| Return loss |
>>60dB |
| Splicing modes |
40 user programmable modes and up to 60 modes for reference(factory predetermined setting). |
| Splice loss estimate |
Available |
| Attenuation splice function |
Intentional high splice loss of 0.1dB to 15dB(0.1dB step) can be made for an in-line fixed attenuator. |
| Storage of splice result |
The last 2000 results to be stored in the internal memory. |
| Fiber display |
X / Y, or both X and Y simultaneously. |
| Magnification |
295x for single X or Y view, or 147x for X and Y view. |
| Viewing method |
Two CMOS cameras and 5.6 inch color LCD monitor. |
| Operating condition |
0 to 5000m above sea level, 0 to 95%RH and -10 to 50? respectively. |
| Mechanical proof test |
2N(standard)/ 4.4N(option) |
| Tube heater |
Built - in tube heater with 10 heating modes and up to 20 modes for reference. |
| Tube heat time |
Typical 35sec. with FP-03 protection sleeve. |
| Applicable protection sleeve length |
60mm, 40mm and a series of micro sleeves. |
| No.of splice/heating with battery |
Typical 80 cycles with BTR-06(S)/ Typical 160 cycles with BTR-06(L). |
| Power supply |
Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06(S / L). |
| Terminals |
USB 1.1(USB-B type)for PC communication. Video terminal RCA video jack / NTSC. |
| Wind protection |
Max. wind velocity of 15m/s. |
| Dimensions |
150W × 150D × 150H(mm) |
| Weight |
2.3kg(2.8kg including AC adapter ADC-11) |
Includes:
Fujikura FSM-50S
Fujikura CT-20 Fiber Cleaver
(55) Fujikura FP-03 Fiber Splice Protection Sleeves
Fujikra ACD-11 AC Adapter/Battery Charger
Fujikura BTR-06 Battery Pack
Fujikura FH-50-900 Fiber Holder for Cleaver
Fujikura FH-50-250 Fiber Holder for Cleaver
AC Adapter/Charger
Power Cord
DC Charger Cord
Spare Electrode Set
Plastic Screen Cover
USB PC Interface Cable
User Manual On CD-ROM
Hard Carrying Case
|
