|
| |
1L13 Ideal Lantek 7G Cat5e/6/7 1GHz LAN Cable Certifier |
|
|
|
| |
 |
 |
 |
|
|
|
 |
 |
IDEAL LanTek 7G Cat5 Cat5e Cat6 Cat6a & Cat7 Digital LAN Cable Analyzer
Test, Certify & Print Cat5/Cat5e, Cat6/Cat6a & Cat7 Cable Installations up to 1GHz!
Included Adapters:
(2) IDEAL Lantek High Performance Cat5/5e/6/6a Channel Adapters
(2) IDEAL P/N: 0012-00-0628 Category 7 Tera Adapters
Price: $ 5,595.00 / Each
|
 |
|
|
|
| |
 |
 |
 |
|
|
Ideal LANTEK® 7G LAN Cable Certification Tester
LANTEK offers a family of high performance cable certification testers to support a full range of LAN cable testing. The LANTEK family of certification testers uses the IDEAL patented measurement system that removes the effects of ordinary patchcords, thus making channel and permanent link certification of a cable standard such as CAT6A or ISO-F possible without changing adapters. The same patented technology also makes DUALmode Testing possible so the users can get any two test results simultaneously. As a result, the LANTEKs save you money and time on the job.
Features
- High-performance LANTEK 7G sweeps up to 1 GHz and supports testing requirements up to CAT 6/6a/7/ISO-F and beyond
- Level IV/IIIe/III accuracy - independently verified by ETL for baseline, channel and permanent link
- DUALmode testing to save time - reports channel and permanent link test results simultaneously
- Test with patchcords to save money - performs CAT6/5e/ISO-D/Ea testing with standard patchcords to achieve the lowest cost of ownership
- Largest internal/external memory capacity - makes record management easy
- Convenient FIBERTEK™ accessory - simultaneously tests two fibers for attenuation and length
- Innovative TRACETEK™ accessory - performs advanced fiber fault location and troubleshooting functions
| FEATURES |
| Frequency Range |
1 GHz |
| Supports CAT7 & ISO-F |
? |
| Supports CAT6a |
? |
| Support CAT6/5e/3 and ISO-E/D/C |
? |
| Accuracy Level III/IIIe (Draft)/IV verified by |
ETL |
| Support DUALmode Testing to Save Time |
? |
| Test with Patchcords to Save Money |
? |
| Screen Display Area |
Best |
| CAT6 Test Storage with Graphs |
500 |
| Expansion Slots |
CompactFlash Card |
| Standard External Compact Flash Memory |
64MB |
| USB/Serial Port |
? |
| Copper TDR Trace |
? |
| Fiber Loss Measurement (FIBERTEK) |
Option |
| Fiber Distance to Break (TRACETEK) |
Option |
| Talk over Fiber & Copper (Full Duplex) |
? |
| Display Screen on Remote |
? |
| Troubleshooting Tone Generator on Remote |
? |
| External Rapid Battery Charger & Extra Batteries |
? |
The Only Tester in the World to Support DUALmode Testing to Save Time and Labor
Save time and money by simultaneously conducting any combination of two tests with LANTEK 7G. For example, you can select a combination of channel/permanent link or CAT6a/ISO-F standards and get both test results in virtually the same amount of time as a single test. DUALmode can be used as either a troubleshooting tool or to provide an extra level of confidence to your customers by performing certification to additional test standards that demonstrate the quality of your work.
Unique Adapter Scheme
Reduces Cost of Ownership
LANTEK® cable testers utilize an advanced link adapter method to reduce cost of ownership. All testers come with universal link adapters that are used for basic, channel, and permanent link testing. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters that extend beyond the end of the unit. Simply plug in the appropriate reference patchcord to the channel adapter, to perform permanent link testing.
Specifications
| LANTEK |
Range |
Resolution |
Accuracy |
| Length (50-100 Ω cable) |
0 – 2000 ft |
1 ft |
± (3% + 3 ft) |
| Delay |
0 – 8000 ns |
1 ns |
± (3% + 1 ns) |
| Average Impedance |
35 – 180 Ω |
0.1 Ω |
± (3% + 1 Ω) |
| Capacitance (Bulk) |
0 – 100 nF |
1 pF or 3 dig |
± (2% + 20 pF) |
| Capacitance |
0 – 100 pF/ft |
0.1 pF |
± (2% + 1 pF) |
| DC Loop Resistance |
0 – 200 Ω |
0.1 Ω |
± (1% + 2 Ω) |
| Attenuation |
1 MHz – 1 GHz |
0.1 dB |
Level III/IIIe(Draft)/IV |
| NEXT |
1 MHz – 1 GHz |
0.1 dB |
Level III/IIIe(Draft)/IV |
| Return Loss |
1 MHz – 1 GHz |
0.1 dB |
Level III/IIIe(Draft)/IV |
| ELFEXT |
1 MHz – 1 GHz |
0.1 dB |
Level III/IIIe(Draft)/IV |
| Noise Floor |
< –90 dB |
|
|
| Dynamic Range |
> 90 dB |
|
LANTEK Reporter Software
LANTEK Reporter Software allows the installers to upload test results and print reports to meet customer reporting requirements. The Reporter can upload stored tests from LANTEK’s internal memory or compact flash card. The software is designed to produce three different kinds of reports based on the required level of detail:
- Single Line Report – one line per test
- Brief Report – a summary of test results with graphical report
- Detailed Report – complete test results with graphs for all tests and cable pairs
Includes:
- IDEAL Lantek 7G Main
- IDEAL Lantek 7G Remote
- IDEAL Dual Bay Battery Charger w/ AC & Power Cord
- (2) IDEAL Lantek High Performance Cat5/5e/6/6a Channel Adapters
- (2) IDEAL P/N: 0012-00-0628 Category 7 Tera Adapters
- (2) Battery Packs
- IDEAL Lantek Reporter Database
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- USB PC Interface Cable
- Carrying Straps
- Compact Flash PC Card Adapter
- Compact Flash Card Reader
- 1GB Memory Card
- (2) Cat6 Patch Cords
- User Manual On CD-ROM
- Sarrying Case
|
