|
| |
3X07 TTC JDSU Acterna 2000 Test Pad T-BERD 2310 Module |
|
|
|
| |
 |
 |
 |
|
|
|
 |
 |
TTC 2000 Test Pad with T-BERD 2310 Field Services Module. Test electrical interfaces at STS-1, DS3, and DS1 rates & Perform bit error rate tests on DS3/DS1 circuits
Installed Options:
- TB2310-OC3
- TB2310-OC12
- TB2310-DUALRX
- TB2310-STS1
- TB2310-DS1
- TB2310-DS3
- TB2310-VT100
- TB2310-ADV STR PATT
- TB2310-PRI
- TB2310-FT1
- TB2310-DDS
- TB2310-SIGNALING
- TB2310-TIM
| Regular Price: | $ 5,495.00 / Each |  | | Sale Price: | $ 4,995.00 / Each | | You Save: | $ 500.00 / Each |
|
 |
|
|
|
| |
 |
 |
 |
|
|
The 2310 SONET Field Services Module is an all-in-one integrated testing solution
that performs multi-rate transmission testing from DS0 to OC-48/48c and supports
physical layer and enhanced services testing at different network rates. Its modular
architecture protects your long-term investment by providing the flexibility, scalability,
and field upgradability to support evolving test needs.
INSTALLED OPTIONS:
- - DUALRX
- - STS1
- - OC3
- - OC12
- - DS1
- - DS3
- - VT100
- - ADV STR PATT
- - PRI
- - FT1
- - DDS
- - SIGNALING
- - TIM
Product Highlights
-Multi-rate transmission testing from DS0 to OC-48c in a single hand-held unit
-Multi-services testing capabilities including ATM, GR-303, ISDN, signaling, voice frequency (VF), and digital data service (DDS)
-Multiple operation modes to terminate and monitor circuits from various network access points
-Easy-to-use, touch-screen graphical user interface (GUI) simplifies and expedites testing
-Modular TestPad 2000 architecture enables up-to-date support for established and emerging technologies in a single platform
-Engineered for the field with rugged construction, lightweight design, and battery-powered operation
-Automated testing features minimize training costs and testing complexity
Application Highlights
-Perform end-to-end BER testing using a wide range of stress test patterns
-Analyze network performance by simulating abnormal conditions and inserting various errors and alarms
-Perform in-service monitoring of the circuit under test to ensure quality of service
-Verify proper provisioning of network multiplexers and de-multiplexers
-Qualify protocol services such as ATM, GR-303, and ISDN and decode protocol messages
-Perform VF and signaling analysis on test circuits
-Troubleshoot performance of channelized DS0 services from an in-service circuit using the drop and insert operational mode
-Perform network timing synchronization tests and isolate timing errors
Function Highlights
-Test optical interfaces at OC-48/48c, OC-12/12c, and OC-3/3c rates
-Test electrical interfaces at STS-1, DS3, and DS1 rates
-Perform bit error rate tests on SONET/DS3/DS1 circuits
-Manipulate SONET overhead bytes with an easy-to-use interface and analyze network performance under abnormal conditions
-Perform bi-directional monitoring of STS-1/DS3/DS1 circuits
-Monitor and test ATM circuits and verify quality of service measurements
-Place and receive calls on an ISDN PRI circuit and test non-facility associated signaling (NFAS) and backup D-Channel circuits
-Monitor GR-303 protocol links for proper configuration and collect call statistics
-Analyze signaling bits on a T1 voice trunk and place and receive calls
-Use VT100 emulation to configure and monitor network elements
Features
The 2310 meets the ever-changing needs of today’s transmission test workforce with powerful features that provide streamlined, reliable functionality across all applications.With the 2310, testing and service qualification are as easy as the touch of a button. Because technicians need only minimal training to use this equipment, testing objectives are addressed more quickly and costs of ownership are significantly reduced. Key features on the 2310 include:
-Application-Driven Icons
-Auto Configuration
-Automation
-Configurable Results (Quad Resultsâ„¢)
-Physical, Active Port, and Laser Active LEDs
-Simultaneous Results for Different Signal Rates
-Timed Prints and Error Logs
-Through Mode for All Rates
Applications
-SONET Analysis
-DS3 Analysis
-DS1 Analysis
-ATM Analysis
-GR-303 Protocol Link Analysis
-ISDN PRI Testing
-Signaling Analysis
-Loop-Back Applications
Performance Characteristics of the TTC2000 Test Pad
| Form Factor: |
Mainframe |
| Optical Test Interface: |
OC12 |
| Electrical Test Interface: |
DS3 |
| DS1 Drop & Insert to DS-3: |
Option |
| DS-1/DS-3 Drop & Insert to SONET: |
Option |
| DS-0 Drop & Inster to DS-1: |
No |
| DS-0 Drop & Insert to DS-3/SONET: |
No |
| OC-48 Through Mode: |
Option |
| ATM Testing: |
No |
| Stratum III Clock: |
No |
| SONET VT1.5,DS-3,ATM Mapping: |
No |
| VBR, CBR, UBR Shaping: |
No |
| ATM QoS Measurement: |
No |
| DCC Drop & Insert: |
No |
| ATM VP/VC & OAM Support: |
No |
| ATM 250 Channel Tx & Rx: |
No |
| ATM HEC Error Generation & Analysis: |
No |
| Raw BITS Output From SONET: |
No |
| Fractional T1 (nx56/nx64) Drop & Insert: |
Option |
| VF Channel Drop & Insert Test: |
Option |
| Alarm and Status LEDs: |
No |
| Alarm Status Monitoring: |
No |
| Alarm Generation: |
No |
| Loop Backs: |
No |
| Display Type: |
Color CRT |
Programmability/Connectivity of the TTC2000
| User Interface: |
Proprietary |
TTC2000 Compliance
| CE Compliance: |
Not on file |
| UL Compliance: |
Compliant |
TTC2000 Power Requirements
| Input Power: |
Not required |
| Battery Requirement: |
11 V |
| Battery Life: |
2 hrs |
TTC2000 Physical Dimensions
-Width: (N/A)
-Height: 190 mm(7.48 in)
-Length: 57 mm(2.24 in)
-Weight: 2.3 kg(5.07 lb)
Includes:
- TTC Test Pad 2000 Communication Analyzer With Color Screen
- T-BERD 2310 Field Service Module With Options:
- - DUALRX
- - STS1
- - OC3
- - OC12
- - DS1
- - DS3
- - VT100
- - ADV STR PATT
- - PRI
- - FT1
- - DDS
- - SIGNALING
- - TIM
- (2) Bantam - Bantam Cable
- 440 Dual - BNC Male Dual Cable
- TTC 80-41645 Dual Bantam - Split to RJ45
- Westek Electric Dual 440D To Dual 440D w/ Tracer
- (2) SM FC-SC Fiber Cables
- SC-SC Fiber Cconnector
- Stylus
- Battery Pack
- AC Power Adapter
- Power Cord
- User Manual On CD-ROM
- Soft Carrying Case
- Carrying Strap
|
